Standard 3 / 2V
The 3/2V Standard solenoid valve is manufactured with a . Its technical specifications are detailed below.
MULTIVOLTAGE 12 VDC/VAC, or 24 to 240 VDC/VAC 50/60Hz. BRUSHLESS ENGINE, OPTIONS SUCH AS DPS, BSR AND INTERFACE. TORQUE FROM 2NM TO 45NM.
MULTIVOLTAGE 12 VDC/VAC or 24 to 240 VDC/VAC 50/60Hz. BRUSHLES ENGINE. OPTIONS SUCH AS DPS, BSR AND INTERFACE. TORQUE FROM 20NM TO 300NM.
VOLTAJE (100-240 VDC/VAC 50/60Hz). MOTOR BRUSHLESS. 4 MICROINTERRUPTORES STDP. PAR MÁXIMO DE 10NM.
VOLTAGE VL (24 VDC / VAC) AND H (85-240 VDC / VAC). TORQUE OF 10NM.
VOLTAGE 12 VDC/VAC – 24 VDC/VAC – 48 VDC/VAC – 110 VDC/VAC and 240 VAC. TORQUE FROM 20NM TO 85NM.
THE SERIES A PNEUMATIC ACTUATOR HAS A HARD ANODISED BODY AND EPOXY POLYESTER COVER.
The AE Series A pneumatic actuator has a body made of Hard Anodized and an Epoxy Polyester cover. The technical specifications are detailed below.
The Series A TTF pneumatic actuator has a body made of Hard Anodized and an Epoxy Polyester cover. The technical specifications are detailed below.
The Series A NN pneumatic actuator has a body made of Chemical Nickel and a cap of Chemical Nickel. The technical specifications are detailed below.
The Series A Pneumatic Actuator I features a Forged Stainless Steel body and Forged Stainless Steel end cap. The technical specifications are detailed below.
THE C SERIES CN PNEUMATIC ACTUATOR HAS A HARD ANODISED BODY AND EPOXY POLYESTER COVER.
The Series C CN pneumatic actuator has a body made of Hard Anodized and an Epoxy Polyester cover. The technical specifications are detailed below.
5470 EEXIA ATEX EEXM ATEX EXIA EEXDIICT6 STANDARD 3/2V STANDARD 5/2V JJ08
RMD050 RMD102 RMD140 RMD165 RMD254
YT-1000R YT-1050R YT-3300R YT-3350R YT-3400R YT-3450R
YT-200 YT-205
The limit switch box is used to indicate the position of the valve, open or closed. The CB Series has a body made of Polypropylene + 15% Gray fiberglass with a choice of Blue or Orange finish.
The limit switch box is used to indicate the position of the valve, open or closed. The CA Series has a body made of Aluminum.
The limit switch box is used to indicate the position of the valve, open or closed. The CA Series has a body made of Aluminum.
The limit switch box is used to indicate the position of the valve, open or closed. The CA Series has a body made of Aluminum.
The limit switch box is used to indicate the position of the valve, open or closed. The CB Series has a body made of Polypropylene + 15% Gray fiberglass with a choice of Blue or Orange finish.
The limit switch box is used to indicate the position of the valve, open or closed. The CP “dome” Series has a body made of gray Makrolon + transparent Makrolon on the lid.
The limit switch box is used to indicate the position of the valve, open or closed. The CA Series has a body made of Aluminum.
The limit switch box is used to indicate the position of the valve, open or closed. The CP Series has a body made of LatiOhm.
The limit switch box is used to indicate the position of the valve, open or closed. The CP Series has a body made of LatiOhm.
The limit switch box is used to indicate the position of the valve, open or closed. The YT-870 has a body made of Aluminum.
